Design of Steel Structures
Master the principles, code procedures, and member checks needed to design safe and economical steel structures.
12
Lessons
~5h
Study time
30
Exam questions
70%
Pass mark
QR-verifiable Certificate of Training
Self-paced online, start today
About this course
This intensive course gives you a structured, code-based grounding in the design of steel structures. Starting from the fundamentals of structural steel behaviour, you will work through material properties and section classification, the response of members to tension, compression, bending, and buckling, and the detailed design criteria for tension members, columns, beams, and connections. Every lesson is built around worked numeric examples and realistic design scenarios, so each concept is tied directly to the calculations professional engineers perform daily. The course then compares the major design philosophies and codes in use worldwide, including LRFD and ASD under AISC, limit state design to Eurocode 3, and the Indian Standard approach, before closing with a practical look at structural design software and the discipline required to use it responsibly.
The course is written for civil and structural engineering students, graduate engineers, draughters moving into design roles, and site engineers who want to understand the calculations behind the drawings they build from. Worked capacity checks, comparison tables, and case studies drawn from real project patterns are used throughout, and every module closes with key takeaways that consolidate the material into practice-ready rules.
On completion you sit an online exam of thirty questions, and successful candidates receive a verifiable digital certificate that can be shared with employers and professional bodies as evidence of continuing professional development.
- Subject
- Other Training
- Format
- Self-paced online — the lessons open as soon as you enrol
- Study time
- About 5 hours across 12 lessons
- Assessment
- Final Exam: 30 questions, 70% pass mark
- Exam attempts
- Unlimited, at no extra cost
- Certificate
- Skedmia Certificate of Training, valid for 1 year and verifiable at skedmia.com/verify
- Access
- Lifetime access with a one-time payment
Course content
6 modules · 12 lessons · about 5h · final exam
01Module 1 — Introduction to Steel Design2 lessons · 47 min
- Steel Structures: Types, Advantages, and LimitationsPreview22 min
- Principles of Steel Design, Loads, and Load Combinations25 min
02Module 2 — Properties of Steel and Steel Sections2 lessons · 47 min
- Properties of Structural Steel and Material Testing22 min
- Steel Sections, Classification, and Section Properties25 min
03Module 3 — Behavior of Steel Structures2 lessons · 47 min
- Response of Steel Structures Under Load: Strength and Stiffness22 min
- Buckling, Stability, and Ductility of Steel Members25 min
04Module 4 — Design Criteria for Steel Members3 lessons · 75 min
- Design of Tension Members25 min
- Design of Compression Members and Columns25 min
- Design of Beams and Connections25 min
05Module 5 — Analysis and Design to Codes: LRFD, ASD, Eurocode, and IS2 lessons · 47 min
- Methods of Structural Analysis for Steel Frames25 min
- Design Codes Compared: AISC LRFD and ASD, Eurocode 3, and IS 80022 min
06Module 6 — Designing Steel Structures with Software1 lesson · 30 min
- Design Software: Tools, Workflow, and Case Studies30 min
What you earn
A certificate anyone can verify in seconds
Score 70% or better on the final exam and Skedmia issues your Certificate of Training with a unique certificate number. Every certificate carries a QR code that resolves to our public register, so an employer or auditor can confirm it is genuine without contacting anyone. Certificates state a validity of 1 year from issue and can be renewed.
Verified at skedmia.com/verify
Certified by
Before you enrol
How is the course delivered?
Entirely online and self-paced. Once you enrol, the lessons open immediately in your Skedmia account on any device, and you can stop and resume whenever you like.
How do I earn the certificate?
Complete the lessons, then sit the 30-question final exam. Score 70% or more and your Certificate of Training is issued straight away with a unique certificate number and QR code. The PDF downloads from your account.
What happens if I don't pass?
Review the lessons and retake the exam as many times as you need, at no extra cost. Each attempt is marked immediately.
How does an employer verify my certificate?
Every certificate carries a QR code and a certificate number. Scanning the code, or entering the number on our verification page, returns the holder’s name, the course and the issue date. No account is needed.
How can I pay?
By card through our secure Stripe checkout, with access opening instantly. Or by bank transfer: we show our account details and an order reference, you send the receipt, and the course opens once the payment is verified.
Can I enrol a team?
Yes. Organisations enrol staff as a cohort, follow progress on a manager dashboard and receive completion reports formatted for an audit file. See corporate training or send an enquiry.
For organisations
Training a whole team on this course?
Enrol staff as a cohort, follow progress from one dashboard and receive completion reports ready for your audit file.
Keep browsing
More other training training
NEWIT, Security & AI
Entry-Level SOC Analyst (L1) Training
NEWIT, Security & AI
Detection Engineering 2026: 100 Priority Use Cases and Correlation Rules
NEWIT, Security & AI

